Colour System Selection - Panasonic TX-51P100 Operating Instructions Manual

General Operation
Colour System Selection (Different region use differing systems)
If a clear picture with current colours cannot be obtained when a Broadcast or AV signal is received.
Push the "PRE." (PRESET)
1
button 6 times. (In AV mode it
is only necessary to push the
PRE.
"PRE." (PRESET) button
once.)
Push the Volume Up "+" or
2
Down "-" button repeatedly
+
until the optimum image is
produced.
Push the "PRE." (PRESET)
3
button 3 times.
(In the AV mode, push the
PRE.
"PRE." (PRESET) button
once.)
1, 3
-
DISPLAY TV/AV PRE.
(TV set)
2
CH2
2
CH2
2
^
+
^
GAME
Colour System Condition.
The colour system will change
as shown.
AUTO PAL SECAM
NTSC3.58 NTSC4.43
Note:
PAL, SECAM and NTSC 3.58
are different colour signal
b r o a d c a s t t r a n s m i s s i o n
systems applicable to differing
countries NTSC 4.43 is a trick
playback mode used in special
VCR's to playback NTSC
recorded video tapes through
PAL television equipment.
This returns the set to the
normal viewing condition.
The selected Colour System is
automatically memorised.
35