Tuning Procedure
Use the Programme Number
5
Up " " button to sequentially
3
4
check each station.
If necessary, repeat steps 3 to
4 for each Programme Number.
After all stations are tuned,
6
push the "PRE." (PRESET)
button 4 times.
PRE.
Helpful Hint
(1) To tune, push the Main Menu button and Position button on the Remote Control.
By following the display in the Preset Menu, setting can be formed using only the Remote Control.
(2) If a clear picture with correct colours cannot be obtained when a Broadcast or AV signal is received, refer to the
"Colour System Selection" operation on page 35.
(3) After the Automatic tune is finished, push the Programme Number " " button to confirm the tuning condition for
each Programme Number. If some Programme Numbers are unused, it is possible to skip such Programme
Numbers. Please refer to the Programme Number Skip operation on page 30.
(4) Repeated pushing of the "PRE." (PRESET) button changes the Preset Menu as follows;
CH SELECT
SYS SELECT
(Page 21)
TV Mode
(Normal viewing condition)
AUTO TUNE
(Page 24)
(Page 22)
SKIP
FINE TUNE
(Page 30)
(Page 28)
MANUAL TUNE
SOUND SYS
(Page 34)
(Page 26)
COLOUR SYS
(Page 35)
This returns the set to the
normal viewing condition.
P r o g r a m m e N u m b e r
memory locations.
25