Panasonic SV-AP10E Operating Instructions Manual page 35

4,6
5
7
8
Connecting and Operating with a personal computer
Installing this printer driver allows the Photo Printer to be used as a full-
colour printer.
For Windows Me
1
Turn on the personal computer and insert the supplied
CD-ROM into the CD-ROM drive.
2
Turn on the Photo Printer.
3
Use auxiliary USB Connection Cable to connect.
≥The [Add New Hardware Wizard] screen appears.
≥Depending on your PC environment, step 4 and 5 may be skipped.
If this is the case, you will proceed from step 6.
4
Click the [Next] Button.
5
Click the [Finish] Button when the Printer Driver
Software is detected.
6
[Add New Hardware Wizard] screen appears again.
Click the [Next] Button.
7
Select [No] when the [Add Printer Wizard] screen
appears.
≥Select [Yes] to set as the default printer.
≥After clicking [Finish], the message of [File *****.DLL is not found]
can be displayed depending on the environment of PC. Many PCs
may install this file on the Hard Disk. Click [Refer] and select
[C:\windows\option\cabs].
8
Click the [Finish] Button.
≥The driver setup is completed.
≥When the Printer Driver Software is not detected, please refer to
page 37.
≥Please read also the "Notes on Installation of Printer Driver"
(l l l l 41) carefully.
35 35 35 35