Changing The Small Jets - Miele KM 360 G Installation Instructions Manual

Changing the small jets

(for all burners)
To change the small jets, the burner
securing screws must first be loosened
and the upper section of the appliance
removed.
^ Remove the operating controls by
pulling them upwards.
^ Remove the upper section.
N.B. To remove a stainless steel upper
section:
Lift it up at the back, push it forwards
and remove.
N.B. To remove a ceramic upper
section:
Insert the lever supplied between the
frame and the worktop, prise up the
upper section and remove.
Conversion to another type of gas
a
b
^ Remove the ignitor a.
^ Using a small screwdriver, unscrew
the small jet b in the gas fitting.
^ Pull the jet out with a pair of pointed
pliers.
^ Select the jets as shown in the table,
fit, reversing the procedure, and
secure.
21