Changing The Small Jets; Functional Check - Miele SmartLine CS 7611 Operating And Installation Instructions

Converting to another gas type

Changing the small jets

 Remove the burner components.
 Loosen the fixing screws on the burn-
ers.
 Pull the control knobs off.
 Loosen the fixing nuts on the under-
side of the appliance.
 Carefully remove the underside of the
appliance.
a
b
 Remove the ignition switch .
 Using a small screwdriver, unscrew
the small jet  in the gas fitting.
 Pull out the jet with a pair of pliers.
 Fit the correct jets securely (see jet
table).
 Secure the jets against inadvertent
loosening with sealing wax.
64

Functional check

 Check all gas fittings for leaks.
 Reassemble the hob.
 Ignite all burners to check that they
are operating correctly.
– The flame must not go out on the
lowest setting, or when the control is
turned quickly from the highest to the
lowest setting.
– On the highest setting, the flame
must have a distinctive and visible
core.
 Adhere the label supplied with the
jets, stating the type of gas being
used.