Panasonic Viera TX-P50VT20BA Operating Instructions Manual page 40

How to Use Menu Functions
Menu
3D Settings
Timer Programming
Off Timer
USB HDD Setup
VIERA Link
HDMI Content
Detection
Q-Link
AV1 / AV2 out
Standby Power
Save
Intelligent Auto
Standby
Q-Link Download
Child Lock
Favourites Edit
Channel List
Auto Setup
Signal Condition
Favourites Edit
Channel List
Auto Setup
Channel Sorting
by Region
Manual Tuning
Update Channel
List
New Channel
Message
Signal Condition
40
Item
Adjusts and sets to view 3D images (p. 34)
Sets a timer to remind watching or record forthcoming programmes (p. 58)
Sets the time until the TV automatically goes to Standby mode
(Off / 15 / 30 / 45 / 60 / 75 / 90 minutes) (p. 19)
Registers the connected USB HDD and makes the settings for the recording (p. 70)
Sets to use VIERA Link functions (Off / On) (p. 95)
Adjusts the picture settings according to the content type signal from the connected
equipment via HDMI cable (Off / Auto)
●
This function is available if the connected equipment supports HDMI Content Type.
●
The content type information will be displayed for several seconds when this function
works.
Selects which AV terminal is to be used for data communication between this TV and a
compatible recorder (AV1 / AV2) (p. 94)
●
Select the connected terminal to the recorder even it is not compatible with Q-Link.
Chooses the signal to be transmitted from the TV to Q-Link
(TV / AV1 / AV2 / AV3 / Monitor)
●
Monitor: Image displayed on screen
●
Component, PC and HDMI signals cannot be outputted.
Controls the power consumption in Standby mode of the connected equipment to
reduce the consumption (Off / On) (p. 96)
●
This function is available when "VIERA Link" is set to "On".
Makes non-watched or non-used connected equipment go into Standby mode to
reduce the power consumption (Off / On (With reminder) / On (No reminder)) (p. 96)
●
This function is available when "VIERA Link" is set to "On".
Downloads analogue channel information to a Q-Link compatible equipment
connected to the TV
Locks a channel / AV input to prevent access to it (p. 60)
Creates a list of favourite freesat channels (p. 49)
Skips the unwanted freesat channels (p. 49)
Automatically sets the freesat channels received in the area (p. 46)
Checks the freesat signal condition (p. 49)
Creates a list of favourite DVB channels (p. 51)
Skips the unwanted DVB channels or edits DVB channels (p. 51)
Automatically sets the DVB channels received in the area (p. 47)
Automatically sorts tuned channels according to the available region (p. 50)
Sets the DVB channels manually (p. 50)
Updates DVB Channel List while keeping your settings (p. 52)
Selects whether to give a notification message when a new DVB channel is found
(Off / On) (p. 52)
Checks the DVB signal condition (p. 52)
Adjustments / Configurations (alternatives)