Panasonic WJ-HD500 Instructions Manual page 5

6
Set the unit address with jumper connector on the
HDD as shown.
Note: For further details, refer to the instructions
included in the HDD unit.
7
Place the HDD into the appropriate opening, then fix it
with 2 screws.
8
Plug the 2 connector harness to the installed HDD as
shown.
9
Repeat above steps for HDD #2 through #4.
10
Replace the front lid as before.
HDD #2 & #4
(SLAVE)
HDD #1 & #3
(MASTER)
-5-
Jumper Position
Jumper Position
Jumper Connector