Panasonic WJ-HD500 Instructions Manual page 4

Mounting HDDs
A maximum of 4 HDD units (locally procured) can be
mounted on one extension unit. This page describes
how to install #1 HDD. Repeat the same procedures as
#1 for #2 through #4 HDD.
The HDD units should be installed into the proper open-
ings in order as shown. Never skip or reverse the posi-
tion order of the HDD units.
1
Remove the front lid.
1-1 Loosen the front lid fixing screw.
1-2 Slide the lid to the right and remove it.
2
Remove the HDD bracket #1.
2-1 Loosen 2 screws as shown.
2-2 Pull the bracket #1 out of the opening.
3
Disassemble the bracket #1.
Separate it into the fixing bracket and dummy bracket
by loosening 4 screws.
Keep the removed fixing bracket and 4 screws so that
they are to be used later.
4
Prepare an HDD unit.
5
Mount the HDD on the fixing bracket then fasten them
together with 4 screws.
HDD Positions Inside The Lid
HDD 1
HDD #4
HDD 2
HDD 3
HDD #3
OPERATE
HDD 4
Front Lid
HDD Fixing
Bracket
Jumper Connector
-4-
HDD #2
HDD #1
Extension Unit WJ-HDE
1-2
1-1
Dummy
Bracket
HDD
Fixing Bracket