Table of Contents
Advertisement
Automatic Dialling
Storing names and telephone numbers
into one-touch
For rapid access to frequently dialled numbers, the unit provides 10 entries for one-touch dial.
Stations 1 to 3 can be used alternatively as broadcast keys (p. 33).
Press DE.
1
Display:
2
For stations 1–3:
Press one of the station keys.
Press w to go to the next prompt.
For stations 4–5:
Press one of the station keys.
For stations 6–10:
Press o, then press one of the station
keys.
Enter the name, up to 10 characters (see
3
page 19 for instructions).
Example:
Press w.
4
Example:
5
Enter the telephone number, up to 30 digits,
using the dial keypad.
Example:
If you want to enter a hyphen, press é.
Press w.
6
To program other entries, repeat steps 2 to 6.
Press { to exit the program.
7
If you press DE
instead of {, you can print the one-
touch label card (see right).
22
dial!
PRESS STATION
/
OR USE EASYDIAL
$
DIAL MODE
NAME=John
<S02>=
<S02>=1114497
REGISTERED
!
PRESS STATION
/
OR USE EASYDIAL
Station keys
R
(Hyphen)
DIRECTORY PROGRAM
Helpful hint:
You can confirm the stored entries on the
display (p. 25) or on the telephone number list
(p. 72).
Note:
A hyphen or a space entered in a telephone
number counts as two digits.
To correct a mistake
Press ) or ( to move the cursor to the
incorrect character/number, and then make
the correction.
To delete a character/number
Move the cursor to the character/number you
want to delete, and press { (Delete).
To print the one-touch label card with
stored names
Press DE in step 7.
Display:
Press w to start printing.
Put the card in the one-touch dial location.
/
LOWER
SET
STOP
(Delete)
PRINT LABEL OK?
/
YES:SET/NO:STOP
Advertisement
Table of Contents
