Table of Contents
Advertisement
Automatic Dialling
Storing names and telephone numbers
into one-touch
For rapid access to frequently dialled numbers, the unit provides 12 entries for one-touch dial.
Stations 1 to 3 can be used alternatively as broadcast keys (p. 36).
Press p repeatedly until the following
1
is displayed.
Display:
2
For stations 1–3:
Press one of the station keys.
Example:
Press w to go to the next prompt.
For stations 4–6:
Press one of the station keys.
For stations 7–12:
Press o, then press one of the station
keys.
Enter the name, up to 10 characters (see
3
page 21 for instructions).
Example:
Press w.
4
Example:
5
Enter the telephone number, up to 30 digits,
using the dial keypad.
Example:
If you want to enter a hyphen, press
è.
Press w.
6
To program other entries, repeat steps 2 to 6.
Press { to exit the program.
7
24
dial!
DIRECTORY SET
PRESS STATION OR
/
DIRECTORY SET
PRESS NAVI.[
I H
STATION 1
DIAL MODE
[±]
NAME =John
STORE:PRESS SET
<S01> =
<S01> =1114497
REGISTERED
!
DIRECTORY SET
PRESS STATION OR
/
DIRECTORY SET
PRESS NAVI.[
I H
RECALL
(Hyphen)
]
LOWER
Helpful hint:
You can confirm the stored entries on the
telephone number list (p. 77).
Note:
A hyphen or a space entered in a telephone
number counts as two digits.
To correct a mistake
Press ( or ) to move the cursor to the
incorrect character/number, and then make
]
the correction.
To delete a character/number
Move the cursor to the character/number you
want to delete, and press {.
Station keys
MENU
STOP
(Delete)
SET
Advertisement
Table of Contents
