Table of Contents
Advertisement
Note:
L If you select one of the melody ringtones, the
ringtone will continue to sound for several
seconds if the caller hangs up before you
answer. You may hear a dial tone or no one on
the line when you answer a call.
L The preset melodies in this product are used
with permission of © 2004 M-ZoNE Co., Ltd.
Night mode
Night mode allows you to select a block of time
during which the handset will not ring for outside
calls. This feature is useful for times when you do
not want to be disturbed, for example, while
sleeping. Night mode can be set independently
for the handset and the base unit (page 32).
Using the handset phonebook's category feature
(page 19), you can also select categories of
callers whose calls will override night mode and
ring the handset (Caller ID subscribers only).
Set the date and time beforehand (page 14).
Setting the start and end time for night mode
1
Press {j/OK}.
2
Select "Handset Setup", then press {>}.
3
Select "Ringer Setup", then press {>}.
4
Select "Night Mode", then press {>}.
5
Select "Start/End", then press {>}.
6
Enter the desired hour and minute you wish
to start this feature by selecting 2 digits for
each.
L If you use 12-hour time entry, select "AM"
or "PM" by pressing {*} repeatedly
before entering the time.
7
Enter the desired hour and minute you wish
to end this feature by selecting 2 digits for
each.
L If you use 12-hour time entry, select "AM"
or "PM" by pressing {*} repeatedly
before entering the time.
8
Press {j/OK}.
9
Press {ih}.
Helpline Tel. No.: U.K. 08700 100 076 R.O.I. 01289 8333
Turning night mode on/off
1
Press {j/OK}.
2
Select "Handset Setup", then press {>}.
3
Select "Ringer Setup", then press {>}.
4
Select "Night Mode", then press {>}.
5
Select "On/Off", then press {>}.
6
Select "On" or "Off", then press {>}.
7
Press {ih}.
Note:
L When the night mode is turned on, "[N]" is
displayed.
Setting the ring delay for night mode
This setting allows the handset to ring during
night mode if the caller waits long enough. After
the selected amount of time passes, the handset
will ring, useful when someone urgently needs to
speak with you. If you select "No Ringing", the
handset will not ring during night mode.
1
Press {j/OK}.
2
Select "Handset Setup", then press {>}.
3
Select "Ringer Setup", then press {>}.
4
Select "Night Mode", then press {>}.
5
Select "Ring Delay", then press {>}.
6
Select the desired setting, then press {>}.
7
Press {ih}.
Selecting categories to bypass night mode
1
Press {j/OK}.
2
Select "Handset Setup", then press {>}.
3
Select "Ringer Setup", then press {>}.
4
Select "Night Mode", then press {>}.
5
Select "Select Category", then press
{>}.
Handset Settings
27
Advertisement
Table of Contents
