Table of Contents
Advertisement
3.3 Parts Names and Their Functions
No.
Part Name
3
Front Cover
4
Tray1
5
Bypass Tray
6
Tray1 door
7
Copy Tray
8
Control Panel
9
Exposure Lamp
10
Original Scales
11
Power Switch
12
USB Port
13
Parallel Port
14
Fuser Cover
Inside the Machine
No.
Part Name
1
Imaging Cartridge
Konica 7416CG/7416CP
Description
Open when replacing the Toner Cartridge or Drum Cartridge, or
clearing a paper misfeed. (p. 6-5)
Holds up to 250 sheets of paper and easily adjusts to different paper
sizes.
Special paper can be used. (p. 3-14)
Use for manual feeding of paper.
Holds up to 10 sheets of paper.
Special paper can be used. (p. 3-20)
If Legal-size paper is installed, open this door.
Holds copies fed out face down from the machine.
The Copy Tray can be adjusted to one of three angles. Adjust the Copy
Tray to the angle appropriate for its application. (p. 3-6)
Use to start a copy cycle and make necessary settings. (p. 3-8)
This lamp irradiates the document when it is scanned. The time until the
exposure lamp goes off can be specified. For details on specifying the
setting, refer to "Selecting the "MACHINE SETTING" Menu" on
page 5-3.
Use to align the original. (p. 3-24)
Use to turn the machine on and off. (p. 3-10)
For details, refer to the User Manual for the printer controller.
For details, refer to the User Manual for the printer controller.
Not used
Description
Generates the copy image.
The Imaging Cartridge is constructed of both the Drum Cartridge and
the Toner Cartridge set into place.
3
1
3-5
Advertisement
Table of Contents
