Advertisement
TCD210_220E_QG(e).fm Page 4 Tuesday, December 21, 2004 11:26 AM
Turning the power on
Press {ih} for about 1 second.
Setting the date and time
1
Press {j/OK}.
2
Select "Handset Setup", then press {>}.
3
Select "Time Settings", then press {>}.
4
Select "Set Date & Time", then press {>}.
5
Enter the current day, month and year by selecting 2 digits for each.
6
Enter the current hour and minute by selecting 2 digits for each.
L You can select "AM", "PM" or 24-hour time entry by pressing {*} repeatedly.
7
Press {j/OK}.
8
Press {ih}.
Basic operations
Feature
To turn the power off
To make a call
To turn on the speakerphone
To hang up
To adjust the receiver or speaker
volume
To redial the last number dialled
To make a call using the redial list
To answer a call
To mute your voice during a call
To store a name and phone number
in the handset phonebook
Operation
Press {ih} for about 2 seconds.
Dial the phone number, then press {C}.
Press {s}.
Press {ih}.
Press {e} or {v} while talking.
Press {R}, then press {C}.
Press {R}. Press {e} or {v} repeatedly to
select the desired number, then press {C}.
Press {C}.
Press {C/T}. To return to the conversation, press
{C/T} again.
Press {k}, {j/OK}, select "New Entry", then
press {>}.
Enter the party's name (16 characters max.), then
press {j/OK}. Enter the party's phone number
(24 digits max.), then press {j/OK}. Select the
desired category for the entry, then press {>}.
Select "Save", then press {>}. Press {ih}.
L To enter a name, see the character table in the
operating instructions.
–
–
4
Advertisement
