Panasonic SC-AKX50 Operating Instructions Manual page 16

Recording to a USB mass storage
device or the internal memory
Panasonic will not be held responsible on the
consumer's action to record copyrighted music
in the form of various audio fi les which results in
copyright infringement.
Note:
These functions do not work with any "RANDOM"
•
mode selection.
Repeat mode will turn off when recording starts.
•
A new album is created each time you perform a
•
recording. Depending on the memory, the album's
sequence may change once the recording has
completed.
The recorded sound or music tracks are stored in a
•
folder named "REC_DATA" in the USB.
All tracks are recorded to .mp3 format.
•
Basic recording
1
Select the source to be recorded.
Radio recording:
Tune in the station (Z page 13).
CD recording:
➀ Insert the disc you want to record.
Press [4/9, CD] and then [8] (stop).
➁ Prepare the desired disc recording mode.
Record
programmed
tracks
Record specifi c
tracks
Ensure the disc has stopped.
MUSIC PORT or AUX recording:
Connect and play the equipment (Z page 24).
2
Record to your desired storage location.
Press [7/9, USB REC] or
[7/9, MEMORY REC] to start recording.
"REC" is displayed, followed by "REXXXXXX
MAKING".
"REXXXXXX" indicates the folder's name.
16
RQT804
Program the tracks you
want (Z page 11).
Press [PLAY MODE] to
select 1-TRACK
(Z page 10).
Stop
Press [8] (stop).
recording
"WRITING" is displayed for a few
seconds.
Pause Press [7/9, USB REC] or
recording [7/9, MEMORY REC] during
recording.
Press again to resume recording.
Note:
Pause can only be performed during
recording from the radio, music port
or AUX source (except in SYNCHRO
mode). A track mark (Z page 19) is
inserted every time you pause.
Erase a (Z page 20)
recorded
track
Note:
"RENAME" and "ALBUM" will be displayed when
•
the system rearranges and renames the folders in
ascending order.
USB recording indicator blinks during USB
•
recording.
Checking the track information
While performing basic recording function
(Z see left), you can view the information of the
current track from the display panel.
Press [DISPLAY] repeatedly during recording.
Example: Display during CD recording
Remaining
Elapsed
]
play time
play time
±
USB remaining
recording time
REC
]
mode
≠
Memory remaining
+
recording time