Connections/Initial Setup (Ready To Play) - Panasonic PV-C2522-K Operating Instructions Manual

Connections/ Initial Setup
Please make all cable or antenna connections before powering on.
How to Connect
Connecting
For ANT./Cable
Connect the cable from
Antenna/Cable to the VHF/UHF
terminal on the unit.
For DSS/Cable Box
Connect the OUT jack on your
cable box to the VHF/UHF
terminal on the unit with an RF
cable.
WARNING:
Overtightening "Nut type" RF coaxial cables
may damage jacks. Finger tighten only.
Initial Setup (Ready to Play)
1
Plug the unit power cord into an
AC wall outlet.
2
Press Power* * on the remote or
unit. The unit comes on and auto
channel and clock set starts.
CH AUTO SET PROCEEDING
• If you use a cable box, turn it on and set it to the
Public Broadcasting Service (PBS) channel in
your time zone. If you use a DSS receiver, it
must be turned off.
AUTO CLOCK SET
PROCEEDING
CANCEL : PRESS STOP KEY
8
(Ready to Play)
IN from
ANT./CABLE
VHF/UHF
VHF/UHF
UNIT
Cable TV
Converter Box
VHF/UHF
IN from
ANT./CABLE
3
Settings are made
automatically. When setup is
done, this screen appears.
2 / 6 / 2002 WED 12 : 00PM
DST : ON
SETT I NG : CH 1 0
AUTO CLOCK SET
COMPLETED
If AUTO CLOCK SET IS
INCOMPLETE appears on
screen, set the clock using
MANUAL CLOCK SET
procedure as shown on next page.
AUTO CLOCK SET
IS INCOMPLETE
PLEASE SET CLOCK BY
PRESSING ACTION KEY