Connections / Initial Setup (Ready To Play) - Panasonic PVQ-2512 Operating Instructions Manual

Connections/ Initial Setup
Please make all cable or antenna connections before plugging into
the AC outlet. Plugging the unit power cord into an AC outlet starts
How to Connect
auto channel and clock set.
Connecting
For ANT./Cable
Connect the cable from
Antenna/Cable to the VHF/UHF
terminal on the unit.
For DSS/Cable Box
Connect the OUT jack on your
cable box to the VHF/UHF
terminal on the unit with a RF
cable.
WARNING:
Overtightening "Nut type" RF coaxial cables
may damage jacks. Finger tighten only.
Initial Setup (Ready to Play)
1
Plug the unit power cord into an
AC wall outlet.
Press Power* on the remote or
2
unit. The unit comes on and auto
channel and clock set starts.
CH AUTO SET PROCEEDING
• If you use a cable box, turn it on and set it to the
Public Broadcasting Service (PBS) channel in
your time zone. If you use a DSS reciever, it
must be turned off.
AUTO CLOCK SET
CANCEL : PRESS STOP KEY
8
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com
PROCEEDING
(Ready to Play)
VHF/UHF
VHF/UHF
UNIT
VHF/UHF
3
Settings are made
automatically. When setup is
done, this screen appears.
2 / 6 / 2002 WED 12 : 00PM
SETT I NG : CH 1 0
AUTO CLOCK SET
If AUTO CLOCK SET IS
INCOMPLETE screen
appears, set the clock using
MANUAL CLOCK SET
procedure on next page.
AUTO CLOCK SET
I S I NCOMPLETE
PLEASE SET CLOCK BY
PRESS I NG ACT I ON KEY
IN from
ANT./CABLE
Cable TV
Converter Box
IN from
ANT./CABLE
DST : ON
COMPLETED