Assembly; Operation; Cleaning - Lervia KH 4421 Operating Instructions Manual

Assembly

NOTE: Make certain that the dust
filter is always inserted before
using the appliance.
1. To open the dust collector
dust collector
motor unit .
Make certain that the dust filter
inserted and put the dust collector
back on. Turn the dust collector
until the arrow symbol points to the
dot on the motor unit
2. Should the crevice tool
upholstery brush
sert them into the suction opening of
the dust collector

Operation

1. Remove the hand vacuum cleaner
from the charging station
the supplied plugs and screws
charging station
mounted on the wall.
2. To switch the appliance on, move the
on/off switch
3. After use place the on/off switch
into position "O".
4. The crevice tool
narrow, hard-to-reach areas.
5. The upholstery brush
clean sofas, car seats and other cus-
hioned items.
To remove the upholstery brush
from the hand vacuum cleaner, press
both of the lateral lugs on the tool for-
ward simultaneously.
, turn the
and pull it off the
.
or the
be required, in-
.
. Using
the
can optionally be
to the position "I".
is used to clean
is used to
Put the assembled hand vacuum cle-
aner in the charging station
start the charging process when the
vacuum power is noticeably weaker.

Cleaning

Changing and cleaning the dust filter
is
To achieve the best results, empty the
dust collector
filter after every use.
1. To open the dust collector
dust collector
motor unit
2. To remove the dust filter
motor unit, turn it and pull it off the
motor unit
3. Empty the dust collector
4. Clean the dust filter
and wait until it is completely dry be-
fore putting it back on the motor unit
Do not dry it with hot airstream.
5. Place the dust filter
unit . Turn the dust filter
it. Never use the hand vacuum cleaner
without the dust filter
6. Put the dust collector
Turn the dust collector
arrow symbol points to the dot
the motor unit
Important! The suction opening
must always be open and unblocked.
Blockages lead to overheating and
damage to the motor.
- 7 -
KH4421
and clean the dust
, turn the
and pull it off the
.
from the
.
.
in cold water
on the motor
to attach
inserted.
back on.
until the
.
and
.
on