Table of Contents
Advertisement
Interrupt 19 Capture [Disabled]
When set to [Enabled], this function allows the option ROMs to trap Interrupt 19.
Configuration options: [Disabled] [Enabled]
F12 Boot Menu [Disabled]
When set to [Enabled] and F12 is pressed, this item opens the Boot Menu.
Configuration options: [Disabled] [Enabled]
2.6.3 Security
The Security menu items allow you to change the system security settings. Select
an item then press <Enter> to display the configuration options.
Security Settings
Supervisor Password
User Password
Change Supervisor Password
Boot Sector Virus Protection
Chassis Intrusion
Flash Write Protection
Change Supervisor Password
Select this item to set or change the supervisor password. The Supervisor
Password item on top of the screen shows the default Not Installed. After you
have set a password, this item shows Installed.
To set a Supervisor Password:
1. Select the Change Supervisor Password item and press <Enter>.
2. On the password box that appears, type a password composed of at least six
letters and/or numbers, then press <Enter>.
3. Confirm the password when prompted.
The message "Password Installed" appears after you successfully set your
password. The Supervisor Password item now shows "Installed". To change the
supervisor password, follow the same steps as in setting a user password.
2-28
<Enter> to change
password.
Not Installed
<Enter> again to disable
Not Installed
password.
[Disabled]
[Disabled]
{Enabled]
Chapter 2: BIOS information
Advertisement
Table of Contents
