Panel Description - Icom IC-F61M Instruction Manual

COMPANDER KEY
Push to turn the compander function ON or OFF.
The compander function reduces noise components from the trans-
mitting audio to provide clearer communication.
USER SET MODE KEY
➥ Push and hold for 1 sec. to enter the User Set mode.
• While in the User Set mode, push this key to select an item, and
push [CH Up]/[CH Down] to change the value or condition.
➥ Push and hold
PLAYBACK KEY (p. 22)
➥ Push to playback the recorded messages in sequence, starting
with the latest one.
• A short beep is emitted after playing back each message.
• A long beep is emitted after playing back all messages.
• An error beep is emitted when there are no messages in the
memory.
playing back the message, push and hold for 1 sec. to de-
While
➥
lete the selecting message.
PLAYBACK/REC KEY (pp. 21, 22)
➥ Push to playback the recorded messages in sequence, starting
with the latest one.
• A short beep is emitted after playing back each message.
• A long beep is emitted after playing back all messages.
• "NO REC" is displayed when no message is in the memory.
➥ Push and hold for 1 sec. to start record
recording.
playing back the message, push and hold for 1 sec. to de-
While
➥
lete the selecting message.
this key for 1 sec.

PANEL DESCRIPTION

again to exit the User Set mode.
Push again to stop
ing.
2
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
12