Telephone Base And Charger Installation - VTech S6120-2 User Manual

Getting started

Telephone base and charger installation

Install the telephone base and charger as shown below.
Make sure that the electrical outlet is not controlled by a wall switch.
If you subscribe to digital subscriber line (DSL) high-speed Internet service through
your telephone line, you must install a DSL filter between the telephone line cord
and telephone wall jack. The filter prevents noise and caller ID problems caused
by DSL interference. Contact your DSL service provider for more information about
DSL filters.
Telephone
wall jack
A DSL filter (not
included) is required
if you have DSL
high-speed Internet
service.
The DSL filter must
be plugged into the
telephone wall jack.
Telephone line
cord
• Use only the power adapters and batteries supplied with this product. To order a
replacement, visit our website at www.vtechphones.com or call
1 (800) 595-9511. In Canada, go to www.vtechcanada.com or call
1 (800) 267-7377.
• The power adapters are intended to be correctly oriented in a vertical or floor
mount position. The prongs are not designed to hold the plug in place if it is
plugged into a ceiling, under-the-table or cabinet outlet.
CAUTION: If you subscribe to telephone service from a cable company or a VoIP
service provider, contact your service provider for more information.
Telephone base
Electrical outlet (not
controlled by a wall
switch)
Telephone base
power adapter
2
Charger
adapter
Charger