Dividing A Scene (Avchd, 1080/50P) - Panasonic HDC-TM99 Operating Instructions Manual

When you stop deleting halfway:
Touch [CANCEL] while deleting.
≥ The scenes or still pictures that have already been deleted when the deletion is cancelled
cannot be restored.
To complete editing:
Touch [Return].
≥ You can also delete scenes by touching [MENU], selecting [EDIT SCENE] # [DELETE] #
[ALL SCENES], [MULTI] or [SINGLE].
≥ You can also delete still pictures by touching [MENU], selecting [PHOTO SETUP] #
[DELETE] # [ALL SCENES], [MULTI] or [SINGLE].
≥ During highlight playback or disc playback when connected to a DVD burner (optional),
scenes/still pictures cannot be deleted.
≥ Scenes that cannot be played back (the thumbnails are displayed as
deleted.
≥ In case of [ALL SCENES], the deletion may take time if there are many scenes or still
pictures.
≥ If you delete scenes recorded on other products or still pictures conforming to DCF
standard with this unit, all the data related to the scenes/still pictures may be deleted.
≥ When still pictures recorded on an SD card by other products are deleted, a still picture
(other than JPEG) that cannot be played back on this unit may be erased.

Dividing a scene (AVCHD, 1080/50p)

It is possible to divide an AVCHD or 1080/50p scene.
Any unwanted parts in the scene can be deleted after dividing.
≥ Change the mode to
PICTURE] to [1080/50p] or [AVCHD]. (l 27)
1
Select the menu.
: [EDIT SCENE] # [DIVIDE] # [SET]
MENU
2
Touch the scene to be divided.
3
Touch to set the dividing point.
≥ Using slow-motion playback or frame-by-frame playback
makes it easy to search for the point where you want to divide
the scene. (l 72)
≥ Touch [YES] to continue dividing the same scene. To continue
dividing other scenes, touch [NO] and repeat steps 2-3.
4
Touch [Return] to complete dividing.
≥ Unwanted parts can be deleted. (l 81)
To delete all the divided points
: [EDIT SCENE] # [DIVIDE] # [CANCEL ALL]
MENU
≥ The scenes that were deleted after division cannot be recovered.
and touch the play mode select icon. Then, set [VIDEO/
- 82 -
) cannot be
0h00m15s 0h00m15s 0h00m15s