Demo Mode] [Off]/[On - Panasonic HDC-TM99 Operating Instructions Manual

[CALIBRATION]
Perform the touch screen calibration if a different object to the one touched is selected.
1 Touch [CALIBRATION].
≥ Touch [ENTER].
2 Touch the [_] that appears on the screen with the supplied stylus pen.
≥ Touch [_] in sequence (up left # down left # down right # up right # centre).
3 Touch [ENTER].
[DEMO MODE]
This item is used to start the unit demonstration.
(Only when the mode is at the
If [DEMO MODE] is switched to [ON] and you touch [EXIT] when there is no SD card inserted
and while this unit is connected to the AC adaptor, the demonstration automatically starts.
If any operation takes place, the demonstration is cancelled. However if no operations take
place for approx. 10 minutes, the demonstration automatically starts again. To stop the
demonstration, set [DEMO MODE] to [OFF] or insert an SD card.
[O.I.S. DEMO]
This item is used to start the optical image stabilizer demo.
(Only when the mode is at the
Touch [O.I.S. DEMO], the demonstration automatically starts.
When you touch [EXIT], the demonstration will be cancelled.
[LANGUAGE]
You can select the language on the screen display and the menu screen.
[OFF]/[ON]
or position)
position)
- 38 -