Introduction; Notational Conventions - Fujitsu D3031 Technical Manual

1

Introduction

This technical manual describes the system board D3031, which can be
equipped with up to two processors.
For additional driver information (if available), refer to the Readme files located
on the server hard disk and on the supplied DVDs (see Installation DVD of
ServerView Suite - ServerView Software Products).
You will find further information about the BIOS setup in the "D3031 BIOS Setup
Utility for PRIMERGY RX200 S6" manual.
I
PRIMERGY manuals are available in PDF format on the
ServerView Suite DVD 2. The ServerView Suite DVD 2 is part of the
ServerView Suite supplied with every server.
PRIMERGY Abbreviations and Glossary can also be found on the
ServerView Suite DVD 2.
1.1

Notational conventions

The following notational conventions are used in this manual:
Text in italics
"Quotation marks"
Ê
V
CAUTION!
I
D3031 (RX200 S6)
indicates commands or menu items.
indicate names of chapters and terms that are being
emphasized.
describes activities that must be performed in the order
shown.
pay particular attention to texts marked with this symbol.
Failure to observe this warning may endanger your life,
destroy the system or lead to the loss of data.
indicates additional information, notes and tips.
Technical Manual 9