Connector Panel - Fujitsu D3031 Technical Manual

Connectors and indicators
3.6.2

Connector panel

Figure 7: Connector panel
No. Description
1 USB connectors
2 Global error indicator (orange), CSS indicator (yellow), ID indicator
(blue); (description see preceding section)
3 Management LAN connector (for iRMC S2 server management function)
4 Video connector (VGA)
5 Serial connector COM
6 System LAN connector (LAN 2)
7 System LAN connector (LAN 1), also for iRMC S2 server management
function
LAN connectors
The system board is equipped with an Intel
controller (Intel 82575EB). The LAN controller supports transmission rates of 10
Mbit/s, 100 Mbit/s and 1 Gbit/s.
The LAN controller also supports WOL functionality by means of Magic
Packet™. It is also possible to start a system via a LAN without a separate boot
hard disk drive. PXE is supported here.
The separate management LAN connector is used as a management interface
(iRMC S2) and is prepared for operation with the Remote Management.
Optionally LAN connector 1 can also be used for iRMC S2 server management.
Each LAN connector has two LEDs which display the speed of the connection
and its status:
32
®
dual-port Gigabit Ethernet
Technical Manual
D3031
Features
(RX200 S6)