Basic Engine Parts - O.S. engine MAX-32SX Owner's Instruction Manual

BASIC ENGINE PARTS

Cylinder head
Throttle Stop
Screw
Carburetor
Throttle Lever
Drive Hub
Propeller washer
Crankshaft
Propeller nut
Glowplug
Fuel inlet
Needle valve
Fuel outlet
Cover Plate
Silicone Tube
Fuel inlet
Beam Mount
Crankcase
MAX-15CV-A
INSTALLATION OF THE CARBURETTOR
For 15CV-A
1.
Loosen the retainer screw, rotate the
carburettor to its correct position and make
sure that it is pressed well down into the
intake boss, compressing the rubber gasket,
before retightening screw.
2. Rotate the retainer screw gently until it
stops, then tighten a further 60-90˚.
Do not overtighten the screw as this will
damage the carburettor body.
Rotate the retainer nut
gently until it stops.
8
Tighten a further 60-90˚