Basic Engine Parts - O.S. engine MAX-18CV-RMX Owner's Instruction Manual

NOTE
Never use a propeller that has even a
slight damage.
REMINDER!
Never touch, or allow any object to come
into contact with, the rotating propeller and
!
do not crouch over the engine when it is
running.
STARTER BELT
Necessary for starting the engine.
It is suggested to keep a starter rope as a
reserve.
ELECTRIC STARTER AND STARTER BATTERY
Use a 12-volt electric starter
with suitable battery for start-
ing the engine.(18CV-RM)
SILICONE TUBING
This is required for the connection
between the fuel tank and engine,
also for the water cooling system.
Inner dia. of 2.3mm and outer dia.
of 5Å`5.5mm would be suitable.

BASIC ENGINE PARTS

Water Cooled Head
Carburetor
Type 11J
Drive Hub
Crankshaft
HEX SCREWDRIVER
Necessary for engine installation.
1.5mm, 2mm, 2.5mm, 3mm
SCREWDRIVER
Necessary for carburetor adjustments.
No.1, No.2, etc
SOCKET DRIVER
It is required to tighten and loosen the
carburetor retainer nut. Opposite side distance
of 6mm
LONG SOCKET WRENCH WITH PLUG GRIP
Recommended for easy removal and
replacement of the angled and recessed
glowplug, the O.S.Long Socket Wrench
incorporates a special grip.
10
Glow Plug No.8
Water Cooled Head
Cover Plate
Carburetor
Type 11J
Mounting Lugs
Crankcase
Crankshaft
18CV-RM
11
TOOLS
Glow Plug No.8
Mounting Lugs
Crankcase
Drive Hub
Starter Handle
Recoil Starter
Assembly No.5
Rear Adaptor
18CV-RMX