Basic Engine Parts, Carburetor - O.S. engine max-18tz series Owner's Instruction Manual

STARTER BOX
For starting the engine.
It is not necessary for
the recoil starter ver-
sion-i.e. 18TZ-TX.
7.2V BATTERIES FOR STARTER BOX
Batteries for starter box.
Select according to the
starter box used. Be sure to
full charge before using.
FUEL PUMP
For filling the fuel tank, a simple,
polyethylene "squeeze" bottle,
with a suitable spout, is required.
SILICONE FUEL LINE
Heatproof silicone tubing of
approx. 5mm o.d. and 2mm i.d.
is required for the connection
between the fuel tank and
engine.
BASIC ENGINE PARTS
Carburetor
Type 11K
Crankcase
Crankshaft
HEX SCREWDRIVER
Necessary for engine installation.
1.5mm, 2mm, 2.5mm, 3mm
SCREWDRIVER
Necessary for carburetor adjustments.
No.1, No.2, etc
LONG SOCKET WRENCH WITH PLUG GRIP
Recommended for easy removal and
replacement of the angled and recessed
glowplug, the O.S.Long Socket Wrench
incorporates a special grip.
10
Heatsink Head
Carburetor
Type 11L
Exhaust
Cover Plate
Mounting Lugs
Crankshaft
18TZ(P)-T
MAX-
11
TOOLS
Heatsink Head
Exhaust
Mounting Lugs
Crankcase
Drive Hub
Starter Handle
Recoil Starter
Assembly No.N1
Rear Adaptor
18TZ-TX
MAX-