Initial Setup - Kenwood DDX6054 Instruction Manual

Initial Setup

When pressing the Reset button or turning on the unit for the first time, the Initial SETUP screen is
displayed.
Initial Setup
1 Turns the power On
2 Set each item
[Language] Select the language used for the
control screen and setting items. (page 62)
[Angle] You can adjust the position of the
monitor. (page 65)
[iPod AV Interface Use] Sets the terminal
which iPod is connected. (
[R-CAM Interrupt] Sets a method to switch to
the rear view camera video display. (
"ON": Switches to the rear view camera video
display when engaging the shift knob of
car to "Reverse".
"OFF": Switches to the rear view camera video
display when engaging the shift knob
of car to "Reverse" and then pressing
the [AUD] button for more than 1
second.
The function of the [AUD] button needs
to be set to "R-CAM" beforehand. See
<User Interface> (page 62).
[Color] Sets the screen and button illumination
color. (page 68)
[EXT SW] Setting up power specification
of the external device for which the power
is controlled from this unit. (page 65)
(DNX7240BT only)
3
⁄
•
"iPod")
"OFF")
End initial setup
The settings above can be changed in
(page 58).
<Setup Menu>
87
English