Screen Control; [Screen Control] - Kenwood DDX6054 Instruction Manual

Screen Control

You can adjust the screen mode of the monitor.
1 Display the Screen Control screen
>
Touch [ ] [ ]
Control]. (page 58)
2 Set each item
[Bright] Brightness Control
[Contrast] Contrast Control
[Black] Black Level Adjustment
[Dimmer] Dimmer Mode Setup (
"ON": The display dims.
"OFF": The display doesn't dim.
"SYNC": Turning the Dimmer function On or
Off when the vehicle light control
switch is turned On or Off.
"NAV-SYNC": Turning the Dimmer function
On or Off according to the
Navigation Day/Night display
setting.
⁄
• In this Screen Control screen, you can perform setups for
the menu screen. Setups for videos such as DVD can be
performed on the <Screen Control> (page 42).
> >
[Display] [Screen
"ON")
Registering Bluetooth Unit
Registers the Bluetooth unit to be connected.
1 Display the Bluetooth Setup screen
>
Touch [ ] [
(page 58)
2 Display the Connect Device List screen
3 Search for a Bluetooth unit
1 Displays the registered Bluetooth units.
The busy service becomes active. The available
service becomes inactive.
[ ] When
is appeared, the text display is
scrolled by touching it.
[Search] Searches for a Bluetooth unit.
[SP DEV] Registers a Bluetooth unit that
cannot be registered by normal register
(paring) operation.
⁄
• A new device cannot be registered if there are 5
registered Bluetooth units. Delete unnecessary
registration. See <Bluetooth Unit Connection> (page
71).
>
] [Bluetooth SETUP].
1 1 1
Next page 3
English
69