Advertisement
Quick Links
Epson Stylus
TX420W
®
Start Here
Read these instructions before using your product.
1
Unpack
Caution:
Do not open ink cartridge packages until you are ready to
install the ink. Cartridges are vacuum packed to maintain reliability.
Remove all protective materials.
2
Turn on
1
Connect the power cable.
Caution:
Do not connect to your computer yet.
2
Press the
Encender (On) button.
USB cable
Power cord
3
Select language
The default language of the LCD menus is Spanish.
To select Spanish as your language, press
To select English, press
Iniciar (Start).
Note:
If you want to change the language, press
Iniciar
select it, then press
4
Install ink cartridges
Caution:
Keep ink cartridges out of the reach of children and do not
drink the ink.
Note:
The ink cartridges that come with your printer have a lower
yield due to the ink system charging process. This process is carried
out the first time you turn on your printer and guarantees better
performance.
1
Lift up the scanner, then open the cartridge cover.
2
Shake the ink cartridges gently 4 or 5 times, then
unpack them.
3
Remove only the yellow tape from each cartridge.
Caution:
Don't remove any other seals or the cartridges
may leak.
Iniciar (Start).
or
to select it, then press
or
(Start).
to
Advertisement
Related Manuals for Epson Stylus TX420W
Summary of Contents for Epson Stylus TX420W
-
Page 1: Select Language
Epson Stylus TX420W ® Select language Start Here The default language of the LCD menus is Spanish. To select Spanish as your language, press Iniciar (Start). To select English, press to select it, then press Iniciar (Start). Read these instructions before using your product. -
Page 2: Load Paper
Insert the cartridges in the holder for each color. Squeeze the edge guide as you slide it all the way to the left. Press each cartridge down until it clicks. Load letter or A4-size paper against the right edge and behind the tab, with the printable side face up. -
Page 3: Control Panel Overview
Cancel and disconnect the USB cable. You can’t install your If you experience problems during setup, see below: software that way. Network setup was unsuccessful. Insert the Epson Stylus TX420W software CD. • Make sure you select the right network name. Windows: If you see the AutoPlay window, click Run Setup.exe. - Page 4 Epson with your questions. (Site available in Spanish and Portuguese only.) Epson and Epson Stylus are registered trademarks, Epson Exceed Your Vision is a registered logomark, of Seiko Epson Corporation. DURABrite is a Argentina (54-11) 5167-0300 Mexico 01-800-087-1080 registered trademark of Epson America, Inc.