Side View; Monitor Specifications; Power Management Modes - Dell 1908WFP User Manual

About Your Monitor: Dell 1908WFP For Dell Flat Panel Monitor User'sGuide
2 Dell Soundbar Connect the power cord for the Soundbar (optional).
power
connector
3 DVI connector Connect your computer DVI cable.
4 VGA Connect your computer VGA cable.
connector
5 USB upstream Connect the USB cable that came with your monitor to the monitor and the computer.
connector Once this cable is connected you can use the USB connectors on the side and bottom of the
monitor.
6 USB Connect your USB devices.
connector
NOTE: You can use this connector only after you connect the USB cable to the computer and the USB
upstream connector on the monitor.

Side View

Left view

Monitor Specifications

Power Management Modes

If you have VESA's DPM™ compliance display card or software installed in your PC, the monitor automatically reduces its power consumption when not in use. This is referred
to as Power Save Mode. The monitor automatically resumes functioning when the system detects input from the keyboard, mouse or other input devices.The following table
shows the power consumption and signaling of this automatic power saving feature:
VESA Modes
Normal operation (with Dell Soundbar and USB active)
Normal operation
Active-off mode
Switch off
NOTE: The OSD only functions in the normal operation mode. One of the following messages appears when the Menu or Plus buttons are pressed
when in Active-off mode.
file:///T|/htdocs/monitors/1908WFP/en/ug/about.htm[10/31/2012 11:33:23 AM]
USB connectors (downstream)
Horizontal Sync Vertical Sync Video
Active Active
Active Active
Inactive Inactive
- -
or
Right view
Power Indicator Power Consumption
Active Green 75 W (maximum)
Active Green 32 W (typical)
Blanked Amber Less than 2 W
- Off Less than 1 W