Organizing Your Cables - Dell 1908WFP User Manual

Setting Up Your Monitor: Dell 1908WFP Flat Panel Monitor User's Guide
5. Connect the power cables.
6. Turn on your monitor and computer. If you do not see an image, push the input select button and ensure the correct input source is selected. If you still do not see an
image, see Troubleshooting your

Organizing Your Cables

After attaching all necessary cables to your monitor and computer, (See
above.
Attaching the Soundbar (Optional)
1. Working from the rear of the monitor, attach the Soundbar aligning the two slots with the two tabs along the bottom rear of the monitor.
2. Slide the Soundbar to the left until it snaps into place.
3. Plug in the power cord from the Soundbar in to the connector on the back of the monitor.
4. Insert the lime-green mini stereo plug from the rear of the Soundbar into the computer's audio output jack.
file:///T|/htdocs/monitors/1908WFP/en/ug/setup.htm[10/31/2012 11:33:48 AM]
monitor.
Connecting Your Monitor for cable attachment,) use the cable slot to neatly organize all cables as shown