Dell 1908WFP User Manual page 16

Setting Up Your Monitor: Dell 1908WFP Flat Panel Monitor User's Guide
5. Press MENU to enter the slide bar and then use the - and + buttons, according to the indicators on the menu, to make your changes.
6. Press the MENU button once to return to the main menu to select another option.
7. Press the MENU button twice or thrice times to exit from the OSD menu.
Icon Menu and Submenus
EXIT
BRIGHTNESS & CONTRAST
AUTO ADJUST
INPUT SOURCE
PRESET MODES:
file:///T|/htdocs/monitors/1908WFP/en/ug/operate.htm[10/31/2012 11:34:21 AM]
Description
Select to exit the Main menu.
Brightness adjusts the luminance of the backlight.
Adjust Brightness first, then adjust Contrast only if further adjustment is necessary.
Press the + button to increase luminance and push the - button to decrease luminance (min 0 ~ max 100).
Contrast adjusts the degree of difference between darkness and lightness on the monitor screen.
Press the + button to increase the contrast and press the - button to decrease the contrast (min 0 ~ max 100).
Even though your computer recognizes your monitor on startup, the Auto Adjustment function optimizes the display settings for use with your particular setup.
NOTE:In most cases, Auto Adjust produces the best image for your configuration.
NOTE: When using DVI source, Auto Adjust is not available.
Select the right input source that you need. If you need input Analog signal, select VGA; need input Digital signal, select DVI-D.
Choose the RGB option if monitor is connected to a PC or a DVD using a VGA or DVI cable. Choose the YPbPr option if monitor is connected to a DVD by a YPbPr to VGA or YPbPr to DVI cable or if the DVD color output
setting is not RGB.