Table of Contents
Advertisement
Selecting Heat Mode
You can select Heat mode if you want to heat your room.
You can adjust the temperature and the fan speed when heating.
1
Press the
(On/Off) button.
Result:
The operation indicator on the indoor unit lights up.
The air conditioner starts up in the mode you selected last.
The indoor unit beeps.
2
Press the
button on the remote control until
Result:
The indoor unit beeps each time you press the
The air conditioner runs in Heat mode.
Note
You can change modes at any time.
3
Press the
button to adjust the temperature until the required
temperature is displayed.
You can set the temperature between 61°F(16°C) and 86°F(30°C).
Result:
Each time you press the
- The temperature adjusts by 1°F
- The indoor unit beeps
If the room temperature reaches °F higher than the set
temperature, the air conditioner stops heating, but the fan
continues to operate.
If the room temperature reaches 5°F lower than the set
temperature, the air conditioner starts heating again.
4
Press the
button to select the fan speed until the required setting is
displayed.
Automatic (rotated :
Low
Medium
High
Silence mode
Result:
Each time you press the
For the first 3~5 minutes, the fan may not operate to prevent
cool air from flowing out of the indoor unit.
This helps to warm the air in your room sufficiently.
Note
Silence mode( ) makes the noise quieter during
operating the indoor unit in the Heat mode.
5
To control the airflow direction, refer to page 1.
141 Kinderkamack Rd, Park Ridge, NJ 07656 Tel: 201-782-1782 Fax: 201-782-1783 Web: www.amgair.com Email: info@amgair.com
is displayed.
button.
button:
)
button, the indoor unit beeps.
Air Marketing Group LLC
15
E-
Hide quick links:
Advertisement
Table of Contents
