HTC TOUCH DUAL User Manual page 110

110 Getting Connected
5. Tap Next.
6.
Wait for the paired device to accept the partnership. The receiving party needs to enter the same
passcode that you specified.
7.
The name of the paired device is then displayed. You may edit and enter a new name for that device.
8. Select the check boxes of services that you want to use from the paired device.
9. Tap Save.
Note
Creating a Bluetooth partnership between two devices is a one-time process. Once a partnership is created, the
devices can recognize the partnership and exchange information without entering a passcode again.
To accept a Bluetooth partnership
1. Ensure that Bluetooth is turned on and in visible mode.
2. Tap Yes when prompted to establish a partnership with the other device.
3.
Enter a passcode (the same passcode that is entered on the device requesting the partnership) to
establish a secure connection. The passcode must be between 1 and 16 characters.
4. Tap Next.
5. Tap Done. You can now exchange information with the paired device.
Tips • To rename a Bluetooth partnership, tap and hold the partnership's name on the Devices tab of the Bluetooth
• To delete a Bluetooth partnership, tap and hold the partnership's name on the Devices tab, then tap Delete.
Connect a Bluetooth hands-free or stereo headset
For hands-free phone conversations, you can use a Bluetooth hands-free headset such as a car kit with your
device. Your device also supports ADP (Advanced Audio Distribution Profile) which allows you to use a
Bluetooth stereo headset for hands-free phone conversations and for listening to stereo music.
To connect a Bluetooth hands-free or stereo headset
1.
Make sure that both your device and the Bluetooth headset are turned on and within close range,
and that the headset is visible. Refer to the manufacturer's documentation to find out how to set the
headset in visible mode.
2. Tap Start > Settings > Connections tab.
3. Tap Bluetooth > Devices tab > Add new device. Your device
searches for other Bluetooth-enabled devices and displays
them.
4. Tap the name of the Bluetooth headset, then tap Next. The
device will automatically pair the device with the Bluetooth
headset.
Windows Mobile will automatically try one of the
preconfigured passcodes (0000, 1111, 8888, 134) to pair the
Bluetooth headset with the device. If this fails, you have to
enter the passcode delivered with your headset manually.
5. Tap Done. While the Bluetooth stereo headset is connected,
the Headset icon (
Note
If the Bluetooth stereo headset becomes disconnected, turn the headset on and repeat steps 1 to 3 above. Tap
and hold the name of the Bluetooth stereo headset and tap Set as Wireless Stereo.
Settings screen, then tap Edit.
) will appear on the title bar.