Maytag MIT8795BS00 Installation Instructions Manual page 6

3. Determine andmark edge ofrange inthecutout space. The
mounting bracket canbeinstalled oneither t heleftsideor
right s ideofthecutout. Position m ounting bracket incutout
sothatright ( orleft) e dge ofthebracket is1%e" (2.4 cm) f rom
themarked e dge oftherange, asshown.
Tip Over Hazard
A child or adult can tip the range and be killed.
Install anti-tip bracket to floor or wall per installation
instructions.
Slide range back so rear range foot is engaged in the
slot of the anti-tip bracket.
Re-engage anti-tip bracket if range is moved.
Do not operate range without anti-tip bracket installed
and engaged.
Failure to follow these instructions can result in death
or serious burns to children and adults.
1. Remove the anti-tip bracket that is taped inside the upper
oven with the package containing literature.
2. Determine which mounting method to use: floor or wall.
If you have a stone or masonry floor, you can use the wall
mounting method.
A
4=
............................... i
A. Anti-tip bracket
B. Mark edge of range.
C. 1_,, (2.4 cm)
Drill two 1/8"(3.0 mm) holes that correspond to the bracket
holes of the determined mounting method. See the following
illustrations.
Floor Mounting
A B
A. #12 x 1 _" screws
B. Anti-tip bracket
Wall Mounting
A
A. #12 x 1 _" screws
B. Anti-tip bracket
5. Using a Phillips screwdriver, mount anti-tip bracket to the wall
or floor with the two #12 x 15/8"screws provided.
6