Connecting Audio Equipment - Onkyo TX-SV353 Instruction Manual

Audio video control receiver
Table of Contents

Advertisement

Connecting audio equipment

L (Left)
R (Right)
Turntable
PHONO
OUT
ANTENNA
AM
FM
75
GND
L
L
R
R
PHONO
CD
L
OUTPUT
CD player
TX-SV353
6
Refer to the instruction manual of each component when making connections.
L
On each pair of connectors, the lower connector (red and marked R) corresponds to
the right channel and the upper connector (white and marked L) to the left channel.
Insert the plugs and connectors securely. Remember that improper connection can
R
result noise, poor performance, or damage to the equipment.
REAR SPEAKERS CENTER
R
WARNING
AVIS
RISK OF ELECTRIC SHOCK
RISQUE DE CHOC ELECTRIQUE
DO NOT OPEN
NE PAS OUVRIR
VIDEO-1
VIDEO-2
MONITOR
INPUT
OUTPUT
INPUT
OUTPUT
V
V
FRONT SPEAKERS
OUTPUT
INPUT
(REC)
(PLAY)
INPUT
OUTPUT
INPUT
SUB-
A
WOOFER
PRE OUT
B
TV/AUX
TAPE
VIDEO-1
VIDEO-2
CAUTION: SPEAKER IMPEDANCE
FRONT A OR B: 6 OHMS MIN. / SPEAKER
FRONT A+B: 12 OHMS MIN. / SPEAKER
CENTER / REAR: 6 OHMS MIN. / SPEAKER
L
R
R
L
LINE IN
Tape deck
REMOTE
AC OUTLETS
CONTROL
SWITCHED
TOTAL 100W MAX.
Improper connection
Insert completely
L
SPEAKER
MANUFACTURED UNDER LICENSE FROM DOLBY
LABORATORIES LICENSING CORPORATION.
"DOLBY", THE COUBLE-D SYMBOL AND "PRO LOGIC"
ARE TRADEMARKS OF DOLBY LABORATORIES
LICENSING CORPORATION.
AUDIO VIDEO CONTROL
RECEIVER
R
L
TX-SV353
MODEL NO.
RATING:
A
B
R
L
R
LINE OUT
Remote controller connections
Cassette tape decks and compact disc players equipped with
an Onkyo
controller included with this unit.
To enable remote controller operation of other components,
connect the remote controller cable as shown at the left.
NOTE:
To enable proper remote controller operation, both the
cables and the audio cables must be connected to the
units.
This unit's remote controller cannot be used to control
Onkyo turntables.
An
mm) mini jacks is included with any other component
installed with an
The direct function feature
When a compact disc player and a tape deck with the
connector are connected together, you can use the direct
function feature.
When you operate the desired component (compact disc
player or tape deck), The TX-SV353 Input Selector automat-
ically switches to that component.
In this way, it is not necessary to operate the Input Selector
to change listening sources.
CAUTION:
Do not plug in the power
cord until all connec-
tions have been made.
AM FREQ. STEP
9kHz
10kHz
AC OUTLETS
REMOTE
CONTROL
SWITCHED
TOTAL 100W MAX.
VOLTAGE SELECTOR
220-230V
120V
connector can be operated using the remote
remote controller cable equipped with 1/8" (3.5
connector.
To wall outlet

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents