LG LMV1680BB Installation Instructions Manual page 12

STEP 3: Prepare The Ventinc/ Blower
ROOF-VENTED INSTALLATION:
1. Remove one blower unit mounting screw and
one or several blower plate mounting screw(s).
Remove the blower plate from cabinet. See
Figure 19.
2. Carefully lift the blower unit out of the microwave
/
oven. blower plate
3. Rotate blower unit 90°so the exhaust ports face
the top of the cabinet. See Figure 20,
4. Place blower unit back into microwave oven.
5, Use side cutter or tin snips to cut and remove knockouts
"A" from blower plate. Discard knockouts. Be careful not
to distort the plate. See Figure 21.
6, Reattach blower plate to microwave oven.
Attach with the one blower unit mounting screw and then
the two blower plate mounting screws. See Figure 22.
Figure 19
blower plate
mounting
screws
\
blower unit
mounting screw
Blower Unit
Figure 20
Knockouts "A"
l
blower unit
blower plate
mounting
screws
blower plate
Figure 21
blower plate blower unit
mounting screws
Figure 22
-12-