Search Mode - Denon DN-A7100 User Manual

When the channel Artist name/Song title is
displayed:
N A M E / T I T L E
P i n k F l o i d
F l o i d / M o n e y
The "NAME/TITLE" is displayed for 2 seconds,
followed by the artist's name and song title.
(If artist's name or song title is more than 13 characters
long, the text is scrolled.)
Note:
The front Panel display can indicate up to 13
alphanumeric characters at once. If the information
contains more then 13 characters, the information
scrolls from right to left.
When the channel category is displayed:
C A T : R o c k
Note:
To change the display content from XM information
to DN-A7100 functions, do so with the DISPLAY
button.
This XM information can also be displayed on a TV
monitor connected to the DN-A7100.
2.
1.
1.
Press the AMP button on the remote control
unit.
36
2.
When you press the INFO button, the following
information will be displayed.
VIDEO :DVD
AUDIO :XM
/
SURR-MODE:AUTO
MAIN VOLUME
--------------------
MAIN RETURN
3.
When this display appears, press the INFO
button again. XM information like the following
will appear.
XM INFORMATION
XM :040
CHAN :DeepTracks
NAME :Pink Floid
TITLE :Money
CAT :Rock
SIGNAL:MARGINAL
MAIN RETURN
4.
Press the INFO button again. The information
display will go out.
Note:
If the information contains a character that cannot be
recognized by that unit, the character will be displayed
with " "(space).

SEARCH MODE

You can search for the channel you want to listen to
using one of three search modes. You can also enter
the number directly to select the desired channel.
ALL CHANNEL SEARCH MODE
3.
EXIT
EXIT
(Using the DN-A7100)
1.
Turn the INPUT SELECTOR knob to select
"TUNER".
2.
Press the BAND button to select XM band.
3. Press the 3 or 4 cursor button on the front
panel to select the desired station.
(Using the remote control unit)
1.
To select tuner, Press the TUNER button on the
remote.
2.
Press the BAND button to select XM band.
3.
Press and hold the TUNING –/+ button.
PRESET SEARCH MODE
3.
2.
3.
(Using the DN-A7100)
1.
Turn the INPUT SELECTOR knob to select
"TUNER".
1.
2.
Press the BAND button to select XM band.
3. Press the 1 or 2 cursor button on the front
panel to select the desired preset station.
(Using the remote control unit)
1.
To select tuner, Press the TUNER button on the
remote.
2.
Press the BAND button to select XM band.
3.
PRESET –/+ button to tune in the desired
preset station.
Or enter the preset station number with the
numeric buttons.
2.
1.