Preset Memory - Denon DN-A7100 User Manual

PRESET MEMORY

You can store the desired channel in the Preset
Memory.
In addition to AM and FM, it is possible to preset 50
XM channels.
2.4. 3.
(Using the DN-A7100)
1.
Tune into the desired channel.
2.
Press the MEMORY button on the front panel.
"- -" (preset number) starts blinking on the
dispIay.
- - X M 0 4 0
3. Select the preset number by pressing the 1
or 2 cursor buttons, While this is still blinking
(approx. 5 seconds)
0 1 X M 0 4 0
4.
Press the MEMORY button again to enter.
The display stops blinking.
The station is now stored in the specifi ed preset
memory location.
(Using the remote control unit)
1.
Tune into the desired channel.
2.
Press the MEMO button on the remote. "- -"
(preset number) starts blinking on the display.
3.
Enter the desired preset number by pressing
the numeric buttons.
Note:
When entering a single digit number (2 for example),
either input "02" or just input "2" and wait for a few
seconds.
38
CHECKING THE XM PRESET CHANNEL
The preset channel can be checked on the on screen
display.
2.
3.
2.
4. 5.
1. 3.
(Using the remote control unit)
1.
To select tuner, Press the TUNER button on the
remote.
2.
Press the BAND button to select XM band.
3.
Press the TUNER button on the remote.
4.
Press the INFO button. to view a list of tuner
preset channeI on the on screen display.
5.
If there are 10 or more preset channel, Press
the INFO button. again.
XM PRESET LIST
NO. 1 XM010 XXXXXXXXXX
NO. 2 XM011 XXXXXXXXXX
NO. 3 XM015 XXXXXXXXXX
NO. 4 XM022 XXXXXXXXXX
NO. 5 XM125 XXXXXXXXXX
NO. 6 XM001 Preview
NO. 7 XM001 Preview
NO. 8 XM001 Preview
NO. 9 XM001 Preview
MAIN RETURN EXIT
Note:
The preset channel indication disappears in about 5
sec.
PRESET SCAN
2. 5
4.
1.
1.
Press the TUNER button on the remote.
2.
Press the P.SCAN.
3.
Preset stations are recalled in sequence (No.1
→ No.2 → etc.) for about 5-10 seconds each.
The time changes by the received condition.
No stored preset number will be skipped.
4.
Pressing the PRESET + button during
prescanning speeds up scanning.
Also, pressing the PRESET – button returns to
the previous preset station.
5.
When the desired preset station is received,
cancel the preset scan operation by press the
P-SCAN button.
CLEARING STORED PRESET STATIONS
You can remove preset stations from the memory
using the following procedure.
2. 3.
1.
Recall the preset number to be cleared with
the method described in "PRESET SERCH
MODE".
2.
Press the MEMORY button on the front panel
or Press the MEMO button on the remote.
3.
The stored preset number blinks in the display
for 5 seconds. WhiIe blinking, Press the
CLEAR button on the front panel or the remote
CL button.
4.
"xx CLEAR" appears on the dispIay to indicate
that the specified preset number has been
cleared.
Notes:
• To clear all stored preset stations, press and hold
the CLEAR (CL) and the ENTER buttons for two
seconds.
• There are 50 preset channels prepared at the factory
default. The 50 channels are all set to "CHANNEL
001". Each channel can be stored in the preset
memory. You can search for only the preset
channels.
2.
3.