Table of Contents
Advertisement
Alarm
User Name
48
22 Menu: Telephone
Options
All entries in this chapter are started by pressing the softkeys:
F
Menu
Telephone Option OK
Then select ...
F
F
Alarm OK
Z
Active or Set
The handset allows you to set a time between 00:00 and 23:59
at which it will emit an acoustic signal. If activated """ the dis-
play shows an alarm icon ( ) behind the time.
The alarm signal lasts 60 seconds and can be switched off by
pressing any key. If you are in conversation or if you receice a
call/message, you will hear a special tone.
Note: You can set a special melody for alarm indication (re-
fer to Menu: Ringer Settings starting on page 43). The alarm
volume is the same as the internal ring tone volume.
When the alarm goes off, "Alarm" is shown on the display.
Powering the handset On/Off doesn't affect the alarm setting.
No alarm will be given, when the handset has been switched
off.
The alarm time can only be set when date and time are availa-
ble on the handset (only useable when supported by your tele-
phone system).
F
User Name OK
This function can be used to store the name of the telephone
user. The user name consists of maximum 16 characters. The
name is shown on the idle display. Further information con-
cerning the input of characters can be found at "Entering
Characters / Names starting on page 33".
time 00:00 - 23:59 / OK
Z
name OK
Advertisement
Table of Contents
