Important safety instructions Warning • The Electrical network is classified as hazardous. The only way to power down the charger is to unplug the power supply from the electrical outlet. Ensure that the electrical outlet is always easily accessible. • Refer to safety information before using the product.
* This is network dependent when browsing new missed calls. It remains Mute/unmute the microphone. Lock/unlock the keypad (press and hold). (M330) steadily on when browsing the missed calls in It is displayed when you scroll up/down a list or Microphone Make and receive calls through the speaker.
Get started Configure your phone Charge your phone 1 The batteries are pre-installed in the handset. Pull the battery tape off from the battery door before charging. 2 When using your phone for the first time, you see a welcome message (country dependent). 3 Set the country and language if prompted. 4 Set the date and time.
Technical data Battery • Philips: 2 x AAA NiMH 1.2 V Rechargeable 550 mAh batteries Use only the supplied batteries. Adapter Base and charger: Meic: Tenpao: MN-A102-U130 S003IB0600040 Input: 100-240 V~ 100-240 V~ 50/60 Hz 200 mA 50/60 Hz 150 mA...
Frequently asked questions No signal bar is displayed on the screen. My handset is in searching status, what do I do? The handset on the charger does not charge. The handset does not ring. • The handset is out of range. Move it closer to the • Make sure that the base station has power supply.
Page 9
To access the user instructions online, use the reference model number written on the product label at the bottom of the base station.