Code Blink Out - One for All LITE URC-2589 User Manual & Code Book

Trouble-Shooting

Code Blink Out

Even if you have used the Search Method, it is handy to know
your Television, Video or Satellite Receiver code for future
reference. It's easy to get your code after you have set up
your Television, Video or Satellite.
To blink out your Television code:
1
Press TV.
2 Press and hold MAGIC until the ONE
FOR ALL Lite's red light blinks twice.
MAGIC
Press 9 9 0. The red light will blink twice.
9 9 0
3 For the first digit of your three-digit
1
code, press 1 and count the red blinks. If
there are no blinks, the digit is "0".
4 For the second digit, press 2 and count
2
the red blinks.
5 For the third digit, press 3 and count the
3
red blinks. Now you have found your
three-digit code.
Make sure you write your Television code in the three boxes
on page 19.
Note: To blink back the code for your Video, Satellite or
Cable Box, follow the instructions above only press VCR or
SAT during step 2.
16