Code Blink Out; (To Find Out Which Code Is Currently Programmed); Quick Code Reference - One for All URC-1666 Instruction Manual

URC-1660_ECHO-SKY:7950 Manual_gedrukt 28-10-10 15:48 Pagina 7

(To find out which code is currently programmed)

Once you have Set-Up your URC-1660, you can blink back your
SET-UP CODE for future reference.
Example: To blink out your Television code:
1
2
3 Press 9 9 0. The red LED underneath the POWER key will
4
5
6
7
Important notes:
- If your Set Top Box is not a standard BSkyB Sky+ Box, please follow
the steps above pressing "sat" instead of "tv" during step 2 to
blink out the code programmed in "sat" mode.

Quick Code Reference

Device
sat_________________________
tv_________________________
WWW.ONEFORALL.COM

Code Blink out

Press tv once.
Press and hold down the magic key
until the red LED underneath the POWER key
blinks twice (the red LED will blink once
then twice).
blink twice.
For the first digit of your four-digit code, press 1 and
count all the red blinks. If there are no blinks, the digit is
"0".
For the second digit, press 2 and count all the red blinks.
If there are no blinks, the digit is "0".
For the third digit, press 3 and count all the red blinks.
If there are no blinks, the digit is "0".
For the fourth digit, press 4 and count all the red blinks.
If there are no blinks, the digit is "0". Now you have
your four-digit code.
Code
x2
7