Attach The Lifter - AT&T TL7912 User Manual

Getting started
Headset base and handset lifter installation

Attach the lifter

1. To choose where to install the lifter
on your telephone, look at the space
underneath the corded handset. If there
is a speaker, the lifter should be centered
over the speaker. If there is no speaker, the
lifter should be centered within the space.
Make sure the lifter arm is raised above
the switch hook of the telephone base.
2. Peel off the protective strips from the
adhesive tape at the bottom of the lifter.
3. Carefully place the lifter in the desired
position and press down.
4. Plug the lifter control cable into the
LIFTER jack on the headset base.
23
Adhesive tape