Kenwood TK-T300 Instruction Manual page 19

No. Description
Audio accessory
connector
Rotary knob
Screen
Indicator light
On / off button
Up / down arrows (2)
Alphanumeric keys
Emergency button
Soft keys (2)
Green call key
Red hang-up key
PTT
Auxiliary button 1
Auxiliary button 2
Speaker 1
Speaker 2
Microphone 1
Microphone 2
Auxiliary connector
Side connector to connect speaker microphone.
This allows you to set the audio volume to the desired level.
Programmed changes between ranges and groups after pulse
Auxiliary button 1.
Colour display.
Bicolour LED with various associated functions.
Hold it down for a few seconds to turn the terminal on / off.
These help you navigate through the different menus and lists of
options.
Keys 0 - 9, , #.
Hold it down for a few seconds to make a priority call to the preset
destination.
Press these to select the option that appears on the lower left or right
of the screen.
Press this to make or answer a call. In standby mode, this allows you
to access the list of calls made.
Its main function is to end a call. When you are not calling, pressing
this key will take you to the main screen.
Press to talk button.
Quick access to the special function programmed on this button.
Quick access to the special function programmed on this button.
Speaker for half-duplex calls.
Speaker for duplex calls.
Microphone for half-duplex calls.
Microphone for duplex calls.
Auxiliary connector for programming, charger, etc.
Observations
13