Installation In Vertical Sliding Windows - Goldstar GP100CE User's Manual & Installation Instructions

INSTALLATION IN VERTICAL SLIDING WINDOWS

NOTE: The window installation kit can be used with vertical sliding windows between 457mm
and 1219mm wide .
Foam seal C
(Adhes ive type-shorter)
1
Cut the foam seal A(adhesive type) &
C(adhesive type-shorter) to the proper
length, and attach it to the window sash and
frame.
Type B screws
3
Carefully lower the window. Secure the vent
panel in place with 4 type B screws, plus
one screw for each extension:
Vent panel only: 4 type B screws
Vent panel and
one extension: 5 type B screws
Vent panel and
two extensions: 6 type B screws
Two vent panels and
two extensions: 9 type B screws
I N S TA L L AT I O N I N S T RU C T I O N S
Foam seal A
(Adhesive type)
2
4
Extension panel
(if required)
Insert the vent panel assembly, including
extension panels, if needed, into the window
opening. Extend the extension panels, if used.
Foam seal B
(Non-adhesive type)
Cut the foam seal B(Non-adhesive type) to
the window width. Stuff the foam seal B
between the glass and the window to
prevent air and insects from getting into the
room.
Vent
Panel
5