Table of Contents
Advertisement
Operating the Setup Menu
The Setup menu is accessed in the following sequence: Menu selection
selection
Set key
Select the desired setting menu and change the setting.
Refer to the section "Setup Menu Transition Diagram" (
hierarchy and the items that can be set.
(1) Use the
and
keys to select the main menu.
Setup
EXIT
Setup
Server Setup
Setup
Network Setup
(Next menu)
(2) Press the Set key. The submenu of the selected main menu (Level 1) is displayed. There may be no
submenu depending on the main menu that is selected and the setting items may be displayed
instead (
p. 4-10).
This example explains the condition when [Network Setup] is selected from the main menu.
Setup
Network Setup
If the Set key is pressed by mistake, press the Cancel key to return to the previous menu.
(3) Use the
and
keys to select the submenu (Level 1)
Network Setup
EXIT
Network Setup
Port Setup
Network Setup
Protocol Setup
(Next menu)
p. 4-10) for an illustration of the menu
Set key
2. Setup Menu Procedures
Set key
Network Setup
EXIT
Submenu
4-4
Advertisement
Table of Contents
