Lexmark 201 User Manual page 45

4
Touch the photo or photos you want to print.
Tips:
•
If you want to clear a selected photo, then touch the photo again.
•
If you want to view more photos, then touch the left or right arrow, and then touch the photo to select it.
5
When you are finished selecting the photos you want to print, touch Layout.
6
If you want to change the print settings, then touch Change Settings.
If necessary, touch Accept each time you make a selection.
7
Press .
Note: For best results, allow the prints to dry at least 24 hours before stacking, displaying, or storing.
Editing photos using the printer control panel
1
Load photo paper.
2
Insert a memory card or flash drive.
The Memory Device screen appears on the display.
3
Touch View Photos.
The Select Photos screen appears.
4
Touch the photo you want to edit.
5
Touch to view the selected photo.
Tips:
•
If you want to clear the selected photo, then touch
•
If you want to view the previous or next photo, then touch the left or right arrow, and then touch
the photo.
6
Touch . Touch Accept each time you make a selection.
From here
Crop
Brightness
Red Eye
Auto Fix
Color Effects
7
When you are finished editing the photo, touch Done.
8
If you want to edit another photo, then touch
9
Repeat steps 4 through 8 until all the photos are edited, and then touch Layout.
.
You can
Crop a photo.
Adjust the brightness of a photo.
Reduce the red-eye effect caused by light reflection.
Enhance a photo automatically.
Select whether to print a photo in black and white, sepia, antique brown, or
antique gray.
to return to the Select Photos screen.
Printing
45
to select