POSITIONING THE THERMO-HYGRO OUTDOOR TRANSMITTER
The Transmitter is supplied with a holder that may be attached to a wall with the two
screws supplied. The Transmitter can also be position on a flat surface by securing the
stand to the bottom to the Transmitter.
To wall mount:
1.
Secure the bracket onto a desired wall using the screws and plastic anchors.
2.
Clip the remote thermo-hygro transmitter onto the bracket.
Note:
Before permanently fixing the transmitter wall base, place all units in the desired locations to
check that the outdoor temperature reading is receivable. In event that the signal is not
received, relocate the transmitters or move them slightly as this may help the signal
reception.
CARE AND MAINTENANCE:
Extreme temperatures, vibration and shock should be avoided as these may cause damage to the unit and
give inaccurate forecasts and readings.
52